SEPARATION

Vane separators are the best solution to the problem of separation of liquid particles from gas or mist, as they offer high efficiency, low pressure drop, and low maintenance cost. The vane unit is the heart of every type of separator shown in this catalogue: consisting by various vanes, according to the different operating conditions, it can be manufactured in carbon steel, stainless steel, aluminium, etc., in order to meet customer’s specifications

Multitube separators are the most suitable answer to eliminate liquid and dry gas impurities. They are used both at wellhead and at inlet to compression station, in distribution systems and in many other industrial processes.

Advantage:

● high separation efficiency, even at the presence of wide flow rate variations, which makes them suitable to be installed on plants to be extended in the future.

● constant pressure drop regardless of contaminant loading and servicing.

● low maintenance requiring only occasional blowdown of collected material.

The absolute mist eliminator is the best system to knock down mists and vapours from an air stream before venting. This system enables you to avoid pollution coming from the process mists. The stream, rich in vapours and mists, moves into the vessel where pollutant is removed before venting.
One of the most popular applications of the absolute mist eliminator is on turbines, as a vapour oil separator. The system offers a double advantage.
Besides avoiding pollution, it gives to the user a great benefit.

In fact oil is completely recovered and recycled, reducing frequent fillings.

● low maintenance requiring only occasional blowdown of collected material.

Forain’s range of filter separators is intended for those applications where a high efficiency removal of solids and liquid particles is required, regardless of their size. The use of these separators is the best solution to remove very fine mists or aerosols from the gas flow. Other applications include the removal of lubricating oil from process gas, entrainments in natural gas lines upstream compressor stations, reducing and metering stations, etc.

The absolute separator is designed for those applications where it is required to remove from a gas stream the maximum possible of small liquid particles, very fine mist as well as sub-micronic size.

These separators are mainly used in Ammonia and Urea plants, for the separation of oil mist upstream of dessicant dryer beds. They are also effective for removal of mist in process stream such as Chlorine, Oxigen, Nitrogen, Hydrogen, Carbon Dioxide, etc